• Document: HK 3490 STEREO RECEIVER OWNER S MANUAL
  • Size: 829.65 KB
  • Uploaded: 2019-06-13 19:46:10
  • Status: Successfully converted


Some snippets from your converted document:

HK 3490 STEREO RECEIVER OWNER’S MANUAL SAFETY INFORMATION Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. The A/V receiver’s cabinet may be cleaned by gently wiping with a soft cotton or microfiber cloth. Do not use water or any liquid cleaners. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus. 11. Only use the attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Wet Location Marking Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Service Instructions CAUTION – These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so. Outdoor Use Marking WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 2 SAFETY INFORMATION Important Safety Information when placing the unit on soft woods or other materials that may be damaged by heat or heavy objects. Some surface finishes may be particularly sensitive to Verify Line Voltage Before Use absorbing such marks, due to a variety of factors beyond our control, including Your HK 3490 has been designed for use with 120-volt AC current. Connection the nature of the finish, cleaning materials used, and normal heat and vibration to a line voltage other than that for which it is intended can create a safety and fire caused by the use of the product, or other factors. We recommend that caution hazard and may damage the unit. be exercised in choosing an installation location for the component and in normal If you have any questions about the voltage requirements for your specific model, or maintenance practices, as your warranty will not cover this type of damage to furniture. about the line voltage in your area, contact your selling dealer before plugging the unit Cleaning into a wall outlet. When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only after Do Not Use Extension Cords unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy To avoid safety hazards, use only the power cord attached to your unit. We do not water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth. recommend that extension cords be used with this product. As with all electrical NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning devices, do not run power cords under rugs or carpets or place heavy objects on agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. them. Damaged power cords should be replaced immediately by an authorized

Recently converted files (publicly available):